Each base is 2‘ x 4‘ by three-quarter inch plywood.
And the long sides are 1” x 4” x 4’ long. Remember, you’ll need two of these for each corn hole.
The short sides (top and bottom sides) are 1“ x 4“ x 22 1/2“ long. You’ll need two of these for each as well.
The legs that allow them to sit at an angle are 11/2”in.² by 11 1/8 inch long each with a hole drilled in and through with a 1/4 inch drill bit, at one and a half inches from the top. The screws are 2 1/2 inches long and our quarter inch bolts and you need two for each corn hole and two lock nuts. And then of course the hole in the center, which is 6 inches in diameter across and starts five and three-quarter inches from the top of the board in the middle
Assembly for these is pretty easy. Once all your pieces are cut, you’ll put it all together!
We then painted both of them white - well actually, the painters were there that day. So they painted them white. But you can also just use a roller!
We wanted to put the Joie Inn touch on them, so we made an orange stencil that we used to trace and then paint oranges all over them. To add more detail, we painted the edges black and added a thick black line diagonally through both of them and topped that off with a thin orange line. Then of course I had to add our #joyattheinn hashtag! We can’t wait for days when our guests are throwing the bags and dunking in the pool!